[Natasha Biss]

Looks like someone's been busy. I'll download it, but I haven't been to Elsweyr for a while, and my current char is nowhere near there, so I can't promise feedback.

[Annick Charron]

I just enabled the Anequina update, first positioning its 7z directly beneath AWLS in my BAIN installers window, then de-selecting section 81 (Elsweyr) in AWLS and installing the update. Like Wrinklyninja I've not been to Anequina in ages, and hadn't planned to visit any time soon. But as it happens my avatar is parked in Skingrad. I might have him cross over and work on his merchants guild faction.

-Decrepit-

[lexy]

http://www.tesnexus.com/downloads/file.php?id=19628

Well Brumbek told you already all he did so nothing to add to that. Just integrated his work on Elsweyr in the main meshes archive. Enjoy!

[Marcin Tomkow]

damnit I just installed 5.3.4

If I use the QTP3 redm and further reduced pack only for landscape / roads and this asks me if I use QTP3, what should I do?

[Alkira rose Nankivell]

damnit I just installed 5.3.4

If I use the QTP3 redm and further reduced pack only for landscape / roads and this asks me if I use QTP3, what should I do?

If you are using QTP3 then you are using QTP3. The Redm is textures reduction. Nothing to do with the meshes which are what AWLS replace.

[SWagg KId]

For your own re-assurance Ismelda, the Wrye Bash wizard working as expected, no problems with BAIN installation here. Although I dont have Elsweyr installed so cannot vouch for that new addition, otherwise alls well.

[Juliet]

Thanks for the new version and improved Elsweyr meshes.

[electro_fantics]

The OBMM install confuses me. One OMOD wants to overwrite the other when installing the mesh vs texture omod.

[RAww DInsaww]

For your own re-assurance Ismelda, the Wrye Bash wizard working as expected, no problems with BAIN installation here.

That Wizard was beautiful - even pointed out that my OBSE was not updated.

[BEl J]

Thanks for the new version and improved Elsweyr meshes.

No problem. Check them out and let me know if you'd like some other options. I'm pretty happy with them but I could add lighter yellow windows or something else.

[Kevin Jay]

Ismelda,

There are two more meshes that were fixed in the latest http://www.tesnexus.com/downloads/file.php?id=27710

meshes\architecture\anvil\AnvilFightersGuild01.NIF
meshes\architecture\leyawiin\exterior\LeyawiinMagesGuildHouse.NIF

Would you mind grabbing these and adding them to AWLS so we can continue to install the UOPS first and allow AWLS to overwrite everything? This is similar to my previous request from Sep. If there are any more, I'll send them along, but hopefully this is just about it. If you want me to send the meshes to you, let me know.

[Jennifer Rose]

Was it said somewhere definitively that using the http://www.tesnexus.com/downloads/file.php?id=27308 mod will cancel out this mod in those cities where it is used?

How Its done + Apology

First, I used a collision box mesh as a door. I placed a box on the outside of a building, then one on the inside.
When i link them to teleport inside/outside, I have to place 2 Teleport markers.
This was in total 770 Windows/teleport markers.

Now, my apology. I have not done Leyawiin, Skingrad or the Imperial City.
I simply ran out of steam. So many windows, same thing time after time.
I also wanted to get it out of the way, and move on to something more interesting.

So out of fear i never got around to releasing this, Ive decided just to release what i have.

Sorry for that, but at least you can still use the other 5 citys.

Unless there are any gamebreaking bugs etc, I will not come back to this mod.
If anyone wants to continue and finish the other 3 citys, Feel free, You have permission.

[*Chloe*]

That mod is compatible with AWLS - all it's doing is placing invisible boxes to serve as "doors". Of course that does mean it will suffer the same problem as Illumination Within. Any changes to a cities layout renders it useless. It probably doesn't work on buildings in the wilderness, and definitely won't work with mod added locations.

[Alexandra Louise Taylor]

For some reason with AWLS and WE I never found any windows in Chorrol.

It isn't easy going in the front doors of those big homes at the oak tree. Only one has a back door.

[Jonny]

Here is a converted wizard script for brumbeks mixed textures 5-2-0.

The only changes to the archive structure was to move the two .doc into the 00Core folder and I changed the name of the screenshots folder to "-- Screenshots" so that bain would recognize it as a complex package.

Not sure about the datafile exists lines if they are correct....
Ex.
If DataFileExists("Meshes\\Architecture\\Bravil\\NewBravilXCastleBanner.nif")

Anywho heres the wiz

Spoiler

;Animated Window Lighting System and Chimneys - AWLS Brumbek Mixed Textures Wizard Install ScriptbQTP3 = FalsebCITY = FalsebSMOKE = FalseDeSelectAll;You MUST install this no matter what!SelectSubPackage "00 Core"SelectOne "Do you use Qarl's Textures Pack III?", \		"Yes","",""\		"No","",""	Case "Yes"	  bQTP3 = True	  Break	Case "No"	  bQTP3 = False	  BreakEndSelectSelectOne "Do you want to pick your windows per-city?", \		"Yes","",""\		"No","",""	Case "Yes"	  bCITY = True	  Break	Case "No"	  bCITY = False	  BreakEndSelectSelectOne "Do you use the Chimney Smoke option for the mesh pack?", \		"Yes","",""\		"No","",""	Case "Yes"	  bSMOKE = True	  Break	Case "No"	  bSMOKE = False	  BreakEndSelectIf bCITY ;= True	SelectOne "Pick an Anvil Windows option.", \			"Frames Brumbek Orange","","-- Screenshots\\anvil\\anvil frames.jpg" \			"Frames Brumbek Gray","","-- Screenshots\\anvil\\anvil frames gray.jpg" \			"Frames Alternate Wood Orange","","-- Screenshots\\anvil\\anvil frames wood mixed comp.jpg" \			"Frames Alternate Wood Gray","","-- Screenshots\\anvil\\anvil frames wood gray comp.jpg" \			"No Frames - Brumbek Orange","","-- Screenshots\\anvil\\anvil noframes.jpg" \			"No Frames - Brumbek Gray","","-- Screenshots\\anvil\\anvil noframes gray.jpg" \			"Curtains Frames","","-- Screenshots\\anvil\\anvil curtains frames.jpg" \			"Curtains No Frames","","-- Screenshots\\anvil\\anvil curtains no frames.jpg" \			"Curtains Dark Frames","","-- Screenshots\\anvil\\anvil curtains dark frames.jpg" \			"Curtains Dark No Frames","","-- Screenshots\\anvil\\anvil curtains dark no frames.jpg"		Case "Frames Brumbek Orange"		  SelectSubPackage "Anvil Curtains Frames"		Break		Case "Frames Brumbek Gray"		  SelectSubPackage "Anvil Frames Gray"		Break		Case "Frames Alternate Wood Orange"		  SelectSubPackage "Anvil Wood Frames Orange"		Break		Case "Frames Alternate Wood Gray"		  SelectSubPackage "Anvil Wood Frames Gray"		Break		Case "No Frames - Brumbek Orange"		  SelectSubPackage "Anvil No Frames"		Break		Case "No Frames - Brumbek Gray"		  SelectSubPackage "Anvil No Frames Gray"		Break		Case "Curtains Frames"		  SelectSubPackage "Anvil Curtains Frames"		Break		Case "Curtains No Frames"		  SelectSubPackage "Anvil Curtains No Frames"		Break		Case "Curtains Dark Frames"		  SelectSubPackage "Anvil Curtains Dark Frames"		Break		Case "Curtains Dark No Frames"		  SelectSubPackage "Anvil Curtains Dark No Frames"		Break	EndSelect;==================================================================================	SelectOne "Pick a Bruma Windows option.", \			"Orange - Brumbek Recommends","","-- Screenshots\\bruma\\bruma brumbek mixed.jpg" \			"Brumbek Gray","","-- Screenshots\\bruma\\bruma brumbek gray.jpg" \			"Ismelda Gray","","-- Screenshots\\bruma\\bruma ismelda gray.jpg"		Case "Orange - Brumbek Recommends"		Break		Case "Brumbek Gray"		  SelectSubPackage "Bruma Gray Windows"		Break		Case "Ismelda Gray"		  SelectSubPackage "Bruma Gray Ismelda"		Break	EndSelect;==================================================================================	SelectOne "Pick a Cathedral Windows option.", \			"Orange - Brumbek Recommends","","-- Screenshots\\cath\\cath brumbek orange.jpg" \			"Brumbek's Gray","","-- Screenshots\\cath\\cath brumbek gray.jpg" \			"Ismelda's Gray","","-- Screenshots\\cath\\cath ismelda gray.jpg" \			"Illumination Within Green/Blue","","-- Screenshots\\cath\\cath iw green.jpg" \			"Illumination Within Fire","","-- Screenshots\\cath\\cath iw fire.jpg"		Case "Orange - Brumbek Recommends"		Break		Case "Brumbek's Gray"		  SelectSubPackage "Cathedral Gray Windows"		Break		Case "Ismelda's Gray"		  SelectSubPackage "Cathedral Gray Ismelda"		Break		Case "Illumination Within Green/Blue"		  SelectSubPackage "Cathedral Illumination Within"		Break		Case "Illumination Within Green/Blue"		  SelectSubPackage "Cathedral Illumination Within Fire"		Break	EndSelect;==================================================================================	SelectOne "Pick a Cheydinhal Windows option.", \			"Orange - Brumbek Recommends","","-- Screenshots\\chey\\brumbek chey orange.jpg" \			"Brumbek Yellow","","-- Screenshots\\chey\\brumbek chey yellow.jpg" \			"Brumbek Gray","","-- Screenshots\\chey\\brumbek gray chey.jpg" \			"Curtains","","-- Screenshots\\chey\\curtains chey.jpg" \			"Curtains Dark","","-- Screenshots\\chey\\curtains dark chey.jpg"		Case "Orange - Brumbek Recommends"		Break		Case "Brumbek Yellow"		  SelectSubPackage "Cheydinhal Brumbek Yellow"		Break		Case "Brumbek Gray"		  SelectSubPackage "Cheydinhal Gray Windows"		Break		Case "Curtains"		  SelectSubPackage "Cheydinhal Curtains"		Break		Case "Curtains Dark"		  SelectSubPackage "Cheydinhal Curtains Dark"		Break	EndSelect;==================================================================================	SelectOne "Pick a Chorrol Windows option.", \			"Orange - Brumbek Recommends","","-- Screenshots\\chorrol\\brumbek chorrol mixed.jpg" \			"Brumbek Gray","","-- Screenshots\\chorrol\\brumbek chorrol gray.jpg" \			"Ismelda Gray","","-- Screenshots\\chorrol\\ismelda chorrol gray.jpg" \			"Curtains","","-- Screenshots\\chorrol\\chorrol curtains.jpg" \			"Curtains Dark","","-- Screenshots\\chorrol\\chorrol curtains dark.jpg"		Case "Orange - Brumbek Recommends"		Break		Case "Brumbek Gray"		  SelectSubPackage "Chorrol Gray Windows"		Break		Case "Ismelda Gray"		  SelectSubPackage "Chorrol Gray Ismelda"		Break		Case "Curtains"		  SelectSubPackage "Chorrol Curtains"		Break		Case "Curtains Dark"		  SelectSubPackage "Chorrol Curtains Dark"		Break	EndSelect;==================================================================================	SelectOne "Pick a Farmhouse Windows option, no previews.", \			"Orange - Brumbek Recommends","","" \			"Brumbek Gray","","" \			"Ismelda Gray","","" \			"Curtains","","" \			"Curtains Dark","",""		Case "Orange - Brumbek Recommends"		Break		Case "Brumbek Gray"		  SelectSubPackage "Farmhouse Gray Windows"		Break		Case "Ismelda Gray"		  SelectSubPackage "Farmhouse Gray Ismelda"		Break		Case "Curtains"		  SelectSubPackage "Farmhouse Curtains"		Break		Case "Curtains Dark"		  SelectSubPackage "Farmhouse Curtains Dark"		Break	EndSelect;==================================================================================	SelectOne "Pick an Imperial City Windows option.", \			"Orange - Brumbek Recommends","","-- Screenshots\\ic\\brumbek ic mixed.jpg" \			"Green","","-- Screenshots\\ic\\green ic.jpg" \			"Brumbek Gray","","-- Screenshots\\ic\\brumbek ic gray.jpg" \			"Ismelda Gray","","-- Screenshots\\ic\\ismelda ic gray.jpg"		Case "Orange - Brumbek Recommends"		Break		Case "Green"		  SelectSubPackage "ImperialCity Green Windows"		Break		Case "Brumbek Gray"		  SelectSubPackage "ImperialCity Gray Windows"		Break		Case "Ismelda Gray"		  SelectSubPackage "ImperialCity Gray Ismelda"		Break	EndSelect;==================================================================================	SelectOne "Pick a Priory Windows option.", \			"Orange - Brumbek Recommends","","-- Screenshots\\priory\\brumbek priory mixed.jpg" \			"Brumbek Gray","","-- Screenshots\\priory\\brumbek priory gray.jpg" \			"Ismelda Gray","","-- Screenshots\\priory\\ismelda priory gray.jpg"		Case "Orange - Brumbek Recommends"			If bQTP3 ;= True				SelectSubPackage "10 QTP3 Priory"			EndIf		Break		Case "Brumbek Gray"			If bQTP3 ;= True				SelectSubPackage "10 QTP3 Priory"			EndIf		  SelectSubPackage "Priory Gray Windows"		Break		Case "Ismelda Gray"			If bQTP3 ;= True				SelectSubPackage "10 QTP3 Priory"			EndIf		  SelectSubPackage "Priory Gray Ismelda"		Break	EndSelect;==================================================================================	SelectOne "Pick a Leyawiin Windows option, no previews.", \			"Orange - Brumbek Recommends","","" \			"Brumbek Gray","","" \			"Ismelda Gray","",""		Case "Orange - Brumbek Recommends"		Break		Case "Brumbek Gray"		  SelectSubPackage "Leyawiin Gray Windows"		Break		Case "Ismelda Gray"		  SelectSubPackage "Leyawiin Gray Ismelda"		Break	EndSelect;==================================================================================	SelectOne "Pick a Ships Windows option, no previews.", \			"Orange - Brumbek Recommends","","" \			"Brumbek Gray","","" \			"Ismelda Gray","",""		Case "Orange - Brumbek Recommends"		Break		Case "Brumbek Gray"		  SelectSubPackage "Ships Gray Windows"		Break		Case "Ismelda Gray"		  SelectSubPackage "Ships Gray Ismelda"		Break	EndSelect;==================================================================================	SelectOne "Pick a Skingrad Windows option.", \			"Orange - Brumbek Recommends","","-- Screenshots\\skingrad\\brumbek skingrad.jpg" \			"Ismelda Gray","","-- Screenshots\\skingrad\\ismelda gray skingrad.jpg"		Case "Orange - Brumbek Recommends"		Break		Case "Ismelda Gray"		  SelectSubPackage "Skingrad Gray Ismelda"		Break	EndSelect;==================================================================================Else;==================================================================================	SelectOne "Pick a Complete Texture Pack option.", \			"Orange - Brumbek Recommends","","-- Screenshots\\windows brum orange.jpg" \			"Orange with Curtains","","-- Screenshots\\chey\\curtains chey.jpg" \			"Orange with Dark Curtains","","-- Screenshots\\chey\\curtains dark chey.jpg" \			"Brumbek Gray - The Not-on-Fire Alternative","","-- Screenshots\\windows brum gray.jpg" \			"Ismelda Gray","","-- Screenshots\\windows ismelda gray.jpg"		Case "Orange - Brumbek Recommends"		Break		Case "Orange with Curtains"		  SelectSubPackage "Anvil Curtains Frames"		  SelectSubPackage "Cheydinhal Curtains"		  SelectSubPackage "Chorrol Curtains"		  SelectSubPackage "Farmhouse Curtains"		Break		Case "Orange with Dark Curtains"		  SelectSubPackage "Anvil Curtains Dark Frames"		  SelectSubPackage "Cheydinhal Curtains Dark"		  SelectSubPackage "Chorrol Curtains Dark"		  SelectSubPackage "Farmhouse Curtains Dark"		Break		Case "Brumbek Gray - The Not-on-Fire Alternative"		  SelectSubPackage "Anvil Frames Gray"		  SelectSubPackage "Bruma Gray Windows"		  SelectSubPackage "Cheydinhal Gray Windows"		  SelectSubPackage "Chorrol Gray Windows"		  SelectSubPackage "Farmhouse Gray Windows"		  SelectSubPackage "ImperialCity Gray Windows"		  SelectSubPackage "Leyawiin Gray Windows"		  SelectSubPackage "Priory Gray Windows"		  SelectSubPackage "Ships Gray Windows"		  SelectSubPackage "Skingrad Gray Ismelda"		Break		Case "Ismelda Gray"		  SelectSubPackage "Anvil Frames Gray"		  SelectSubPackage "Bruma Gray Windows"		  SelectSubPackage "Cheydinhal Gray Windows"		  SelectSubPackage "Chorrol Gray Windows"		  SelectSubPackage "Farmhouse Gray Windows"		  SelectSubPackage "ImperialCity Gray Windows"		  SelectSubPackage "Leyawiin Gray Windows"		  SelectSubPackage "Priory Gray Windows"		  SelectSubPackage "Ships Gray Windows"		  SelectSubPackage "Bruma Gray Ismelda"		  SelectSubPackage "Chorrol Gray Ismelda"		  SelectSubPackage "Farmhouse Gray Ismelda"		  SelectSubPackage "ImperialCity Gray Ismelda"		  SelectSubPackage "Leyawiin Gray Ismelda"		  SelectSubPackage "Priory Gray Ismelda"		  SelectSubPackage "Ships Gray Ismelda"		  SelectSubPackage "Skingrad Gray Ismelda"		Break	EndSelect;==================================================================================	SelectOne "Pick a Cathedral Windows option.", \			"Orange - Brumbek Recommends","","-- Screenshots\\cath\\cath brumbek orange.jpg" \			"Brumbek's Gray","","-- Screenshots\\cath\\cath brumbek gray.jpg" \			"Ismelda's Gray","","-- Screenshots\\cath\\cath ismelda gray.jpg" \			"Illumination Within Green/Blue","","-- Screenshots\\cath\\cath iw green.jpg" \			"Illumination Within Fire","","-- Screenshots\\cath\\cath iw fire.jpg"		Case "Orange - Brumbek Recommends"		Break		Case "Brumbek's Gray"		  SelectSubPackage "Cathedral Gray Windows"		Break		Case "Ismelda's Gray"		  SelectSubPackage "Cathedral Gray Ismelda"		Break		Case "Illumination Within Green/Blue"		  SelectSubPackage "Cathedral Illumination Within"		Break		Case "Illumination Within Fire"		  SelectSubPackage "Cathedral Illumination Within Fire"		Break	EndSelect;==================================================================================EndIf;==================================================================================	SelectOne "Pick a Mages Guild Magic Window option.", \			"Default Vanilla Bright Orange","","-- Screenshots\\mages guild\\mages default.jpg" \			"Orange","","-- Screenshots\\mages guild\\mages orange.jpg" \			"Red","","-- Screenshots\\mages guild\\mages red.jpg" \			"Purple","","-- Screenshots\\mages guild\\mages purple.jpg" \			"Ismelda's Blue","","-- Screenshots\\mages guild\\mages blue.jpg"		Case "Default Vanilla Bright Orange"		Break		Case "Orange"		  SelectSubPackage "30 Mages Guild Window Orange"			If bSMOKE ;= True					If bQTP3 ;= True						SelectSubPackage "31 Mages Guild Window Orange or Red Chimney QTP3"					Else						SelectSubPackage "31 Mages Guild Window Orange or Red Chimney"					EndIf			Else				If bQTP3 ;= True					SelectSubPackage "31 Mages Guild Window Orange or Red QTP3"				Else					SelectSubPackage "30 Mages Guild Window Orange"				EndIf			EndIf			If DataFileExists("Meshes\\Architecture\\Bravil\\NewBravilXCastleBanner.nif")				SelectOne "Do you use Qarl's Texture Pack III for Blood & Mud?", \						"Yes","","" \						"No","",""					Case "Yes"						If sSMOKE ;= True						  SelectSubPackage "32 Mages Guild Window Orange or Red Chimney B&M QTP3"						Else						  SelectSubPackage "32 Mages Guild Window Orange or Red B&M QTP3"						EndIf					Break					Case "No"						If sSMOKE ;= True						  SelectSubPackage "32 Mages Guild Window Orange or Red Chimney B&M"						Else						  SelectSubPackage "32 Mages Guild Window Orange or Red B&M"						EndIf					Break				EndSelect		Case "Red"			SelectSubPackage "30 Mages Guild Window Red"			If sSMOKE ;= True				If sQTP3 ;= True 					SelectSubPackage "31 Mages Guild Window Orange or Red Chimney QTP3"				Else					SelectSubPackage "31 Mages Guild Window Orange or Red Chimney"				EndIf			Else				If sQTP3 ;= True					SelectSubPackage "31 Mages Guild Window Orange or Red QTP3"				Else					SelectSubPackage "30 Mages Guild Window Red"				EndIf			EndIf			If DataFileExists("Meshes\\Architecture\\Bravil\\NewBravilXCastleBanner.nif")				SelectOne "Do you use Qarl's Texture Pack III for Blood & Mud?", \						"Yes","","" \						"No","",""					Case "Yes"						If bSMOKE ;= True						  SelectSubPackage "32 Mages Guild Window Orange or Red Chimney B&M QTP3"						Else						  SelectSubPackage "32 Mages Guild Window Orange or Red B&M QTP3"						EndIf					Break					Case "No"						If bSMOKE ;=True						  SelectSubPackage "32 Mages Guild Window Orange or Red Chimney B&M"						Else						  SelectSubPackage "32 Mages Guild Window Orange or Red B&M"						EndIf					Break				EndSelect		Case "Purple"		  SelectSubPackage "30 Mages Guild Window Purple"		Break		Case "Ismelda's Blue"		  SelectSubPackage "30 Mages Guild Window Blue"		Break	EndSelect;==================================================================================	SelectOne "Pick a Imperial City Temple option.", \			"Blue - Brumbek Recommends","","-- Screenshots\\ictemple\\ictemple brum gray blue.jpg" \			"Green","","-- Screenshots\\ictemple\\ictemple brum orange yellow.jpg" \			"Bright Yellow","","-- Screenshots\\ictemple\\ictemple brum gray yellow.jpg" \			"Dingy Yellow","","-- Screenshots\\ictemple\\ictemple ismelda gray yellow.jpg"		Case "Blue - Brumbek Recommends"		  SelectSubPackage "ICTemple Blue"		Break		Case "Green"		  SelectSubPackage "ICTemple Green"		Break		Case "Bright Yellow"		  SelectSubPackage "ICTemple Yellow Bright"		Break		Case "Dingy Yellow"		  SelectSubPackage "ICTemple Yellow Dull"		Break	EndSelect;==================================================================================	If DataFileExists("Meshes\\Architecture\\Bravil\\NewBravilXCastleBanner.nif")		SelectOne "Pick a Blood&Mud Window option.", \				"Blood Red","","-- Screenshots\\b&m\\b&m bloodred.jpg" \				"Brumbek Gray","","-- Screenshots\\b&m\\b&m brumbek gray.jpg" \				"Ismelda Gray","","-- Screenshots\\b&m\\b&m ismelda gray.jpg" \				"Curtains","","-- Screenshots\\b&m\\b&m curtains.jpg" \				"Curtains Dark","","-- Screenshots\\b&m\\b&m curtains dark.jpg" \				"Curtains Green","","-- Screenshots\\b&m\\b&m curtains green.jpg" \				"Curtains Green Dark","","-- Screenshots\\b&m\\b&m curtains green dark.jpg"			Case "Blood Red"		  	  SelectSubPackage "20 B&M Core Blood Red"			Break			Case "Brumbek Gray"		  	  SelectSubPackage "20 B&M Core Blood Red"		  	  SelectSubPackage "25 B&M Gray Windows"			Break			Case "Ismelda Gray"		  	  SelectSubPackage "20 B&M Core Blood Red"		  	  SelectSubPackage "25 B&M Gray Ismelda"			Break			Case "Curtains"		  	  SelectSubPackage "20 B&M Core Blood Red"		  	  SelectSubPackage "25 B&M Curtains"			Break			Case "Curtains Dark"		  	  SelectSubPackage "20 B&M Core Blood Red"		  	  SelectSubPackage "25 B&M Curtains Dark"			Break			Case "Curtains Green"		  	  SelectSubPackage "20 B&M Core Blood Red"		  	  SelectSubPackage "25 B&M Curtains Green"			Break			Case "Curtains Green Dark"		  	  SelectSubPackage "20 B&M Core Blood Red"		  	  SelectSubPackage "25 B&M Curtains Green Dark"			Break		EndSelect	EndIf;==================================================================================	SelectOne "Do you want to use Brumbek's Shivering Isles Textures?", \			"Yes","","" \			"No","",""		Case "Yes"			SelectOne "Pick a Shivering Isles Settlements option.", \					"Brumbek Yellow MultiColor (Recommended)","","-- Screenshots\\si\\settlements.jpg" \					"Default Yellow","","-- Screenshots\\si\\settlements.jpg" \					"Green","","-- Screenshots\\si\\settlements.jpg"				Case "Brumbek Yellow MultiColor (Recommended)"				  SelectSubPackage "40 Shivering Isles Settlements Yellow MultiColor"				Break				Case "Default Yellow"				  SelectSubPackage "40 Shivering Isles Settlements Yellow"				Break				Case "Green"				  SelectSubPackage "40 Shivering Isles Settlements Green"				Break			EndSelect			SelectOne "Pick a Shivering Isles Palace option.", \					"Dual Nature (Recommended)","","-- Screenshots\\si\\si-palace-options.jpg" \					"Default Green","","-- Screenshots\\si\\si-palace-options.jpg" \					"Emerald Green","","-- Screenshots\\si\\si-palace-options.jpg" \					"Rainbow","","-- Screenshots\\si\\si-palace-options.jpg"				Case "Dual Nature (Recommended)"				  SelectSubPackage "41 Shivering Isles Palace Dual Nature"				Break				Case "Default Green"				Break				Case "Emerald Green"				  SelectSubPackage "41 Shivering Isles Palace Green"				Break				Case "Rainbow"				  SelectSubPackage "41 Shivering Isles Palace Rainbow"				Break			EndSelect			SelectOne "Pick a Shivering Isles Crucible option.", \					"Blue-Purple (Recommended)","","-- Screenshots\\si\\si-dem-bluepurple.jpg" \					"Default Orange","","-- Screenshots\\si\\si-dem-default.jpg" \					"Dark Orange","","-- Screenshots\\si\\si-dem-darkorange.jpg" \					"Teal Fire","","-- Screenshots\\si\\si-dem-tealfire.jpg"				Case "Blue-Purple (Recommended)"				  SelectSubPackage "42 Shivering Isles Dementia Blue-Purple"				Break				Case "Default Orange"				Break				Case "Dark Orange"				  SelectSubPackage "42 Shivering Isles Dementia Dark Orange"				Break				Case "Teal Fire"				  SelectSubPackage "42 Shivering Isles Dementia Teal Fire"				Break			EndSelect			SelectOne "Pick a Shivering Isles Bliss option.", \				"More Colors (Recommended)","","-- Screenshots\\si\\si-mania-colors.jpg" \				"Default Orange","","-- Screenshots\\si\\si-mania-defaultorange.jpg" \				"Crazy Vivid Colors","","-- Screenshots\\si\\si-mania-crazyvividcolors.jpg"				Case "More Colors (Recommended)"				  SelectSubPackage "43 Shivering Isles Mania Colors"				Break				Case "Default Orange"				Break				Case "Crazy Vivid Colors"				  SelectSubPackage "43 Shivering Isles Mania Crazy Vivid Colors"				Break			EndSelect		Case "No"		Break	EndSelect;==================================================================================

The omod script will need all lines with the screenshots to be changed to make it work alongside a bain structure.
Ex.
"Frames Brumbek Orange" "-- Screenshots\\anvil\\anvil frames.jpg" \

EDIT: Corrected (omod script needs corrected also)
Changed
Case "Illumination Within Green/Blue"
To
Case "Illumination Within Fire"

[Queen]

Sorry to bring the bad news but WB 291 http://www.gamesas.com/index.php?/topic/1145445-relz-wrye-bash-thead-55/page__view__findpost__p__16821734 in AWLS_-_Brumbek_Mixed_Textures_v5-2-0-19628.7z

[Laura Elizabeth]

Sorry to bring the bad news but WB 291 http://www.gamesas.com/index.php?/topic/1145445-relz-wrye-bash-thead-55/page__view__findpost__p__16821734 in AWLS_-_Brumbek_Mixed_Textures_v5-2-0-19628.7z

Wrye Bash 290 does, the linked beta installer of WB 291 is known to have this plus a few more problems as reported in the Wrye bash thread.

http://www.gamesas.com/index.php?/topic/1145445-relz-wrye-bash-thead-55/page__view__findpost__p__16811699 - (See the bottom of that post) - 291 installer is still beta and only linked for testing

[Scared humanity]

Just for clarification, does the SI package work well with http://www.tesnexus.com/downloads/file.php?id=28378?

[TRIsha FEnnesse]

Wrye Bash 290 does, the linked beta installer of WB 291 is known to have this plus a few more problems as reported in the Wrye bash thread.

http://www.gamesas.com/index.php?/topic/1145445-relz-wrye-bash-thead-55/page__view__findpost__p__16811699 - (See the bottom of that post) - 291 installer is still beta and only linked for testing

oops - thanks - missed that - I thought it was a change of format

[Emily Shackleton]

For the life of me I cannot get this mod to work.

I have OBSE v19b installed and I have the steam install version of Oblivion. Is there any way I can run some sort of diagnostics to see what the problem is? What information do you need to know to help me out?

I'm using Wyre Bash 290.

[Sebrina Johnstone]

Sorry to bring the bad news but WB 291 http://www.gamesas.com/index.php?/topic/1145445-relz-wrye-bash-thead-55/page__view__findpost__p__16821734 in AWLS_-_Brumbek_Mixed_Textures_v5-2-0-19628.7z

If you read the post I made before with the wizard in it, you will notice that I changed the "Screenshots" folder at the head of the stucture to "-- Screenshots". Be careful of how you zip it back up BAIN doesn't always archive folders that start with --.

[Jonathan Braz]

If you read the post I made before with the wizard in it, you will notice that I changed the "Screenshots" folder at the head of the stucture to "-- Screenshots". Be careful of how you zip it back up BAIN doesn't always archive folders that start with --.

Thanks - apparently they will be "fixing" this in Bash - see post by alt3rnity in reply to mine.
Edit : btw you mean that when I archive it from Bash the --SS folder may be skipped ?? didn't know this.

@ncsuactor84 : give a try at Metallic cow's wizard
Also apparently this needs the very latest OBSE crap - it needs 14+ (oops)

[luis dejesus]

First, I'd like to say how much I love AWLS. I wouldn't play without it. Brumbek's texture pack is beautiful, and the new http://www.invision.tesalliance.org/forums/uploads/1294101646/gallery_1515_117_64606.jpg are just awesome.

I wanted to report one issue I've noticed. The http://i304.photobucket.com/albums/nn174/Wren823/LeyawiinFGwindows.jpg, windows on the right side are upside down.

Plus, I have a question. I'm creating a mod using the LeyFG mesh, applied the animated windows with the IllumAnimation Tool, but how would I go about adding the animated chimney smoke?

[Dorian Cozens]

Let me start by saying I am pretty sure that there is nothing wrong with AWLS and this problem must be related to some mod I had previously installed - so please don't worry about using the mod - it is a fantastic addition to the game, which is why I am keen to find a way to resolve my issue.

Also, please let me know if you would prefer me to post this under a "hang" topic rather than here - just seemed like a good idea to start under the AWLS topic.

After playing for some time (659 hours) I started to get hangs on the loading screen when fast travelling to the stables outside of the various cities. I eventually managed to get a save game that would make the problem happen consistently. With a stripped down LO, I can fast travel to the stables, but the game then hangs when I try to enter the city (Anvil and Chorrol have been my test case).

If I remove the Animated Window Lighting System, everything works as normal. I tried removing bloat from my save game, but none was found. I have to suspect something in the save game, because it has been working fine for ages.

Has anyone else ever had this type of problem?

Does anyone have any thoughts on what might be causing this and, more importantly, something I can do to fix the problem.

Thanks for any help.

Here is my Load Order (I deactivated the bash patch to eliminate it being related - this is the full LO).

Spoiler

Active Mod Files:00  Oblivion.esm01  ScreenEffects.esm02  GrassFix.esp03  Unofficial Oblivion Patch.esp  [Version 3.3.3]04  Permanent Effects from Quest Items fix.esp05  DLCShiveringIsles.esp06  Unofficial Shivering Isles Patch.esp  [Version 1.4.0]07  Sensual Loading Screens.esp08  Symphony of Violence.esp09  MIS Low Wind.esp0A  MIS New Sounds Optional Part.esp0B  WindowLightingSystem.esp0C  Faction_Rank_Fix-5862.esp0D  Trainer_Book.esp0E  BookTrackerOBSE.esp0F  Display Stats.esp  [Version 1.3]10  Purge Cell Buffers - Loading.esp  [Version 1.0.0]11  Map Marker Overhaul.esp  [Version 3.8]12  Map Marker Overhaul - SI additions.esp  [Version 3.5]13  sr_super_hotkeys.esp  [Version 0.54]14  DLCOrrery.esp15  DLCOrrery - Unofficial Patch.esp  [Version 1.0.4]16  DLCVileLair.esp17  DLCVileLair - Unofficial Patch.esp  [Version 1.0.6]18  DLCMehrunesRazor.esp19  DLCMehrunesRazor - Unofficial Patch.esp  [Version 1.0.5]1A  DLCSpellTomes.esp1B  DLCSpellTomes - Unofficial Patch.esp  [Version 1.0.1]1C  DLCThievesDen.esp1D  DLCThievesDen - Unofficial Patch.esp  [Version 1.0.7]1E  DLCFrostcrag.esp1F  DLCFrostcrag - Unofficial Patch.esp  [Version 1.0.5]20  Knights.esp21  Knights - Unofficial Patch.esp  [Version 1.1]22  Bag of Holding.esp  [Version 1.5.0]23  AgarMoreVariedSpellEffects.esp24  SD Skill Diary.esp  [Version 2.3]25  Think to Yourself.esp26  DS Flaming Arrows.esp  [Version 1.2]27  Life Detected - OMOD.esp28  BubbleFx.esp

[FITTAS]

Sounds like it's time to fix Abomb, Surazal. Right click on your latest save > Fix Abomb.