Glad you got through it. Have fun!

I have the problem of Golia not talking because I already talked to Salvadore. How do I reset the Journal Index to start the thieves guild?

Can you tell me what are the results of these console commands?

GetJournalIndex A_IV_Diebesgilde
GetJournalIndex A_IV_Diebesgilde3

Edit: I suspect A_IV_Diebesgilde is 2, in which case, I think the command: 'Journal "A_IV_Diebesgilde" 5' should get you going by allowing you into the Thieves guild door behind where Golia stands. If the value is something else, let me know and I'll see if I can figure out what's going on.

tvetro, I don't know what to make of your posts that just quote me without adding anything. It's actually a little annoying, as it will increase the post count of this thread and get it retired faster.

If you are having trouble posting a comment, maybe you should contact the site admins to see if you can get that resolved. Thanks.

I obviously didn't know how to post (this is my first tiem)...my reply was Thanks! It worked.
I hope I did this correclty this time.

Hello, I seem to be experiencing the "Antonia" glitch even though I am patched up and running the English esp. She is not where she is supposed to be. I know where she should be and since this is apparently part of the main quest I just want to know what I should type in the console to get her journal entry then she can sod off and I can move on with the game. I am reduced to asking as I cannot seem to open the ESPs in my construction kit for one reason or another.

I don't remember Antonia being part of the main quest. I believe she is only involved with the City Guard faction quests, which are not related to the main quest.
If there is some "Antonia glitch" in other versions of Arktwend, you should be aware that Arktwend English has changed many things and may differ from other versions, so I'm not aware of any glitch in Arktwend English 3.1. If there is some known problem with her in 3.1, please let me know.
You say you know where she should be, but you don't tell me where you think that is, so I can verify if that is correct or not.
And it would help if you told me the name of the quest you are on, and the latest journal entry.

No worries, disregard. I had another guy tell me what to put into the console to bypass that. I assumed it was a known glitch as it appears to be all over German forums as a notorious pre-patch glitch so I don't know how I ended up getting it whereas everything else works fine. Probably operator error, but regardless it's not a problem anymore.

Arktwend English 3.1 has lots of internal differences from the German version, so advice about console commands for the German version may (probably likely) not work in 3.1.

It would be good to know what the problem was that you were having, and the console command you used to fix it, just in case I need to fix something.

Arktwend seems to take and extremely high performance hit on my computer, I can only run it in 600x800 resolution and i still get 7fps, this is preventing me from playing it for the most part. Is there anyway I can lessen the strain on the computer?

Are you having FPS problems just in the city of Stormwend? Or everywhere in the game? If it's just Stormwend, you don't need to spend too much time there to play the main quest. If it's the whole of Arktwend, then it sounds like it just is not going to play well on your system.

If you are using FPS Optimizer, check to make sure it's reducing the draw distance. You might also check your other video option in the game to turn off shadows etc.

My game seems to be stuck at one part in the quest.

It's probably not stuck.

Oh I didn't see that one part in the room with the undead.

Hi, I am running into problems getting this mod to run.

I have followed the instructions in the readme, but when I invoke the launcher I get the error message "Could not find the movie file sureailogo.bik on the CD."

Here is the first entry under [Movies] in the ini file:

Company Logo=sureailogo.bik

I see "sureailogo.bik" in the ~Data Files/Video directory, so I'm not sure what the problem is.

I am using a fresh install of Morrowind which I haven't played in 5+ years, and my current OS is Windows 7.

Thanks!

Is the morrowind installation where you installed arktwend under "Program Files"? If so, I suggest moving or reinstalling outside of "Program Files", for example: c:\games\arktwend\.

Yes, the original game is located in "H:\Program Files\Bethesda", which was the default path replacing C with my H drive. I then copied and modded the Arktwend version right alongside it and named it "Morrowind-Ark". So, I currently have:

H:\Program Files\Bethesda\Morrowind
H:\Program Files\Bethesda\Morrowind-Ark

Do I need to reinstall the original Morrowind outside of "Program Files" as well, or just the mod? Perhaps I'll reinstall the original into "H:\Games" just to be safe.

Thanks John. I look forward to trying this great mod!

Both. Let me know if that fixes the problem you were having.

No luck. I tried installing to the root H: directory, and then onto C: for good measure. I keep getting the "Could not find the movie file sureailogo.bik on the CD." error.

My Morrowind disc is very old, like from 2002. Could that be the issue? How is the GOTY version different?

I googled and saw then others had encountered this problem, but I don't know the resolution as I don't speak German.

Thanks again.

That could be the issue, I don't know if Arktwend will work if you do not have the GOTY version. The instructions have always mentioned installing GOTY first, and that's all I've ever used and tested with. If you can try it with the GOTY version, let me know if you still have the same problem.

I'm hacing the exact same problem. I get the exact same missing .bink file message. When I load Morrowind, Arktwend_English, Tribunal, and Bloodmoon in my load order I get an error message saying that Vivec_Arena is missing. Also, when I load Arktwend and only Arktwend I get past the splash screens but get a message that says Actor has no data or information or something.

My install is also in the Bethesda folder, but separate from Morrowind.

EDIT:

Just tried reinstalling it in a separate location. Still same problem. It says "Actor has no class".

@ velospeed2002: Arktwend should work as long as you have both expansions for Morrowind, GOTY or not, but you may need the latest patch, if your Morrowind is too old. By the way, if you know the thread, where this problem is resolved, then you could post the link to me through a PM. My German is better then my English, so I should be able to help.

@ Yali: You may NEVER load Morrowind master files (Morrowind.esm, Bloodmoon.esm, Tribunal.esm) with Arktwend! These files are completely incompatible! Look into your loaded files and make sure only Arktwend files are checked.

Yeah, that's what I figured. However, I still get a message stating "Actor has no class" when starting a new game.