Console Command Explanations How to open the console: Usually you open the console using the ` key located below esc, and above TAB.
If however that doesn;t work, try this section;
http://www.elderscrolls.com/forums/index.php?s=&showtopic=19&view=findpost&p=4544468
And a full list of all console commands can be found here;
http://www.uesp.net/wiki/Morrowind:Console
Changing Major/ Minor Skills: aon14 Console command is
enableclassmenuChange your minor and major skills as you like.
Save the game as a new save.
Exit the game completely.
Start it up and load your new save game.
Right click to check your new settings.
If you don't close the game completely or you check your menus before closing the game down then you won't see your new choices.
I expect this is something to do with the way they're held in memory or in a temp file and they don't really expect you to go changing stuff mid game.
If you follow this route then you will not lose spells or levels or anything.
How to stop Ordinators from attacking you: tegger Basic console commands: Set Wearingordinatoruni to 0
"Ordinator Stationary"->StopCombat Player
"Ordinator Stationary"->setfight 10
"Ordinator Wander"->StopCombat Player
"Ordinator Wander"->setfight 10 Named Ordinators Monica21 There's another ID for Ordinators,
"ordinator_high fane". There are only four of them so it's not too big a deal. I would also make note that that command won't work on Ordinators who have names because they have unique IDs. A lot of the ones at the High Fane are named (like the guy standing outside the Hall of Wisdom), so those commands will have to be used separately for each Ordinator. There are also some Ordinators in the vaults with separate IDs, but the CS shows only one of each.
"ordinator_wander_hp" <--- Hlaalu Prison Guard
"ordinator_wander_hvault" <--- Hlaalu Vault
"ordinator_wander_tvault" <--- Telvanni Vault There are two other IDs that are not included, but they are only enabled as part of an Imperial Legion quest and are supposed to attack you as soon as they're enabled.
How to look up Journal Entries: AntiMaNOK, this is the way to look up journal entries if you know the quest ID, which you become accustomed to after awhile. Inside the Construction Kit, click on Character, scroll down to Dialog and click on that. Then, in the upper left hand corner, you'll see the Topic, Voice, and Greetings tabs. Click on the Right Arrow and the 5th tab is journal. Click on that tab. All of the quests in the game are sorted by their journal ID's there. The number in the Disp/Index column is the number that we use when posting quest fixes, i.e.
journal A2_3_CorprusKiller 30.
If you have a difficult time finding the quest you need, but know the Questgiver, then you can do this. In the Object Window, click on NPC, find the questgiver in question, highlight and right click, click on Edit. IF the Blocked checkbox is checked, uncheck it, click Save, and then re-edit the NPC again. Click the dialog option in the lower left hand corner, and wait a sec for the dialog window to appear. There is a Result box towards the bottom of the window that you want to pay attention to for journal updates. So, if we opened Caius Cosade's dialog window, click on Orders under the Info/Response window, you can scroll through the various topics and see what dialog option does what. You will see that if you click on Here. Take this Dwemer artifact and 1 as it appears in my window (the text may be shorter or longer depending on the size of your window..), then you see in the Result box
Journal "A2_3_CorprusCure" 1. That's the command to initate that quest.
Keep in mind that you may have to click on the Greetings tab inside of the dialog window to find the journal entry. It's not always under the Topics tab. Try finding that CorprusKiller command, quest giver Divayth Fyr.
Elric_MelniboneOr if you're too lazy to look up Journal entries in the editor, you can use Elric_Melnibone's Morrowind Journal System. This is an online searchable database located here:
http://www.elricm.com/nuke/html/modules.php?op=modload&name=MWJournal&file=index
Restore NPC If the corpse is still there, open the console, click on the corpse and type: resurrect
If the body is gone, you need to know the ID (usually it's just the name) of the NPC and type
placeatpc "ID goes here" 1,1,1
ie:
placeatpc "sharn gra-muzgob" 1,1,1 Vampire console command: Cunomaglus player->addspell "vampire blood berne/aundae/quarra"Will give you Porphyric Hemophilia, the disease which turns you into a vampire. Just pick which of the 3 bloodlines you want to join (Berne - stealth, Aundae - magic, Quarra - combat) and use the command, then sleep for 3 days. On the third midnight you'll be woken by a terrible dream...
::fangy grin::
Different Commands, Same Effectstartscript vampire_quarra_pc
startscript vampire_aundae_pc
startscript vampire_berne_pcConsole Cure for VampirismStartscript vampire_cure_pcCommand to be able to contract the disease after already being Oneset pcvampire to 0Changing Skills, Attributes, Health, Magicka, and LevelUmrahelOpen the console ~ and type:
For attribute: Player->set"name" #
For level: Player ->setlevel #
For health: Player ->sethealth #
For Magicka: Player ->setmagicka #
For Fatigue: Player ->setfatigue #
For Skills: Player ->set"skill goes here"# ie: Player ->setlongblade 100Adding Items to your InventoryUmrahelOpen the console ~ and type:
Player -> AddItem "ID of item from construction set" #To look up IDs of items in the console or a few hints on how to do so look at the end of this FAQ.
Or look at the following link. Every item + ID is listed here (Morrowind):
http://www.uesp.net/morrow/hints/mwitemtable.shtml
Using the Console to TeleportUmrahel Open the console ~ and type:
coc "cell name"You can look up all the exisiting cell names in the construction set under the tab "world". For example:
coc "balmora"This will teleport you to a spot in the mountains near Balmora. You can also teleport to more specific cells if you like. It would then look something like:
coc "balmora, temple"Q) There are NPCs blocking my way and I want to pass. What can I do about this?Open the console ~ and type:
ra This will Reset Actors to their default locations. To reset certain actors you'll have to be in the same cell as that particular actor. And those actors in the same cell as where you are are also the only ones being affected by this cheat.
Q) I want to get to a certain area but don't know how. I have no key or any other idea of getting there?Open the console ~ and type:
tcl This will toggle collission. You can now walk through walls. However!! Beware, all NPCs that were in the same cell as you have that same ability as well now. They can easily drop through the floor now or disappear in other ways. If this happens use the
ra command to set them back.
The
tcl command can also be used if an NPC which is followind you has gotten stuck.
Q) How do I set my level, skills health, fatique and Magicka?Open the console ~ and type:
For level:
Player -> setlevel #For health:
Player -> sethealth #For Magicka:
Player -> setmagicka #For Fatigue:
Player -> setfatigue #For Skills:
Player -> set"skill goes here"# ie:
Player -> setlongblade 100Q) How do I add items to my inventory?Open the console ~ and type:
Player -> AddItem "ID of item from construction set" # To look up IDs of items in the console or a few hints on how to do so look at the end of this FAQ.
Or look at the following link. Every item + ID is listed here:
http://www.uesp.net/wiki/Morrowind:Item_List
Q) How do I join factions I'd like to join but can no longer join ingame?Open the console ~ and type:
PcJoinFaction "Faction name"Q) How do I raise my rank in a certain faction using the console?Open the console ~ and type:
PcRaiseRank "Faction name"You can also lower your rank. This is useful to bypass the http://www.uesp.net/wiki/Morrowind:House_Telvanni#Telvanni_Master_.27Bug.27.
PcLowerRank "Faction name"Q) How do I bring back an NPC from the void of nothingness after I killed it?Open the console ~ and type:
PlaceAtPc "ID of NPC" 1,1,1The 1,1,1 part means: you'll get one NPC on the exact same position you are when entering that cheat.
Q) How can I get rid of a bounty through console?Open the console ~ and type:
Player -> SetPCCrimelevel 0Q) I've been expelled from faction X how can I bypass this with cheats?Open the console ~ and type:
PCClearExpelled "Faction name"Q) Can I use the console to teleport to certain locations?Yes you can. Open the console ~ and type:
coc "cell name"You can look up all the exisiting cell names in the construction set under the tab "world". For example:
coc "balmora"This will teleport you to a spot in the mountains near Balmora. You can also teleport to more specific cells if you like. It would then look something like:
coc "balmora, temple"Q) How do I reset hostile NPC which are attacking me?Open the console ~ and type:
"NPC ID" -> Setfight 10
"NPC ID" -> SetCombat
"NPC ID" -> SetDisposition 100Q) How do I update my journal manually?On the site of Elricm you can find every journal entry in the game. Located here;
http://www.elricm.com/nuke/html/modules.php?op=modload&name=MWJournal&file=index
Another little walkthrough on this will follow at the end of this FAQ.
Q) How do I reset my bounty?Open the console ~ and type:
Player -> SetPCCrimelevel 0
» Sun Sep 20, 2009 2:30 am 
