[RELZ] Wrye Mash #4 : III - Morrowind

» Fri May 27, 2011 12:40 pm

Due to some hardware chicanery, the C: drive has been taken up by a card reader. Also, the target for the mash shortcut is %SYSTEMDRIVE%\Python25\pythonw.exe mash.py, which doesn't care which drive is used. I changed the drive to specifically E:, but it still won't work.
I seemed to fix it by putting a card into the card reader. Either python or mash must use C: for temporary file storage.

» Fri May 27, 2011 6:36 pm

I can't get Wrye mash to work at all. I know absolutely nothing about Python so help would be much appreciated.

Got the following error message:

Traceback (most recent call last):  File "mash.py", line 7, in     import masher  File "C:\Program Files\Bethesda Softworks\Morrowind\Mopy\masher.py", line 43,in     import wx.lib.iewin  File "C:\Python25\Lib\site-packages\wx-2.8-msw-ansi\wx\lib\iewin.py", line 15, in     import wx.lib.activex  File "C:\Python25\Lib\site-packages\wx-2.8-msw-ansi\wx\lib\activex.py", line 36, in     import comtypesImportError: No module named comtypes

» Fri May 27, 2011 9:01 pm

Weird, I thought Python 2.5 did include comtypes. Anyway, download and install it from http://sourceforge.net/projects/comtypes/.

» Fri May 27, 2011 10:10 pm

I'm hoping that someone can help me with this but I'm trying to clean a save game that CTD's as soon as it loads. It has something to do with IndyBank 2.4a by Kir, but I can't seem to clean the plugin or my saved game since apparently they are already. Anyone have any suggestions? I really don't want to lose my save since a bit of time has gone into it and I don't have a backup (stupidly).

» Fri May 27, 2011 6:46 pm

I'm hoping that someone can help me with this but I'm trying to clean a save game that CTD's as soon as it loads. It has something to do with IndyBank 2.4a by Kir, but I can't seem to clean the plugin or my saved game since apparently they are already. Anyone have any suggestions? I really don't want to lose my save since a bit of time has gone into it and I don't have a backup (stupidly).

Did you try disabling IndyBank from your list?
What does your Warning.txt say?

» Fri May 27, 2011 11:49 am

Did you try disabling IndyBank from your list?
What does your Warning.txt say?

I did, it does the same thing. The Warning.txt file says this;

Unable to locate reference for global script 'BankInterest'.
Unable to locate reference for global script 'PCJail'.

» Sat May 28, 2011 12:10 am

Not sure how much cash you've got in the bank but...

Make a copy of the save
With the copy, remove Indy Bank from your load list.
Clean save with Mash (sync to masters, repair refs, yadda yadda)
Load cleaned save in game.
Save as a new save game.
Re-enable Indy Bank
Freshen up new save game with Mash (sync to masters, repair refs, etcetera)
Load up new save game.

Should mean a usable save, but you'll lose anything you've got in the bank.

» Fri May 27, 2011 3:30 pm

Question. Is there anywhere else I can get wyre mash? I really need it and his site is down...

» Sat May 28, 2011 1:52 am

Question. Is there anywhere else I can get wyre mash? I really need it and his site is down...

It's available on TESNexus now
http://www.tesnexus.com/downloads/file.php?id=27588

» Fri May 27, 2011 9:01 pm

I downloaded from TESNexus, but I can't find a Readme or Installation instructions.

» Fri May 27, 2011 8:16 pm

I downloaded from TESNexus, but I can't find a Readme or Installation instructions.

Mopy/Wrye Mash.html

» Fri May 27, 2011 1:36 pm

I downloaded from TESNexus, but I can't find a Readme or Installation instructions.

You can view the cache site while the real one is down:
http://74.125.155.132/search?q=cache:-DH2t1fDVzkJ:wrye.ufrealms.net/Wrye%2520Mash.html+Mopy/Wrye+Mash.html&cd=1&hl=en&ct=clnk

Links wont work, treat it like a text document.

» Fri May 27, 2011 3:45 pm

AzuMite, Pluto, thanks!

[Edit] BTW, as I read that file I felt my eyes start to roll back in my head...much as they did when I was trying to learn to use Wrye Bash. Somehow I managed to use 200 mods in OB without using Wrye Bash, though eventually I think I used it a little.

» Fri May 27, 2011 1:23 pm

Is there a way to export a text file of my mod order from Mash?

» Fri May 27, 2011 8:13 pm

Is there a way to export a text file of my mod order from Mash?

Yes, you can for your Saves.
Go to the Save tab, click on 'File' in the bottom right-hand corner box where it lists the Save's Masters. Click 'Copy List'
Open your notepad, wordpad or whatever, and Paste it.

» Fri May 27, 2011 12:52 pm

Yes, you can for your Saves.
Go to the Save tab, click on 'File' in the bottom right-hand corner box where it lists the Save's Masters. Click 'Copy List'
Open your notepad, wordpad or whatever, and Paste it.

Ah, yes, that's it! I knew it could be done, but couldn't remember how and, with UFRealms down, couldn't look it up on Wrye's site. Thanks, Pluto.

I've got the Sable Dragon set up for my new game, so thanks for that, too. :goodjob:

» Fri May 27, 2011 11:52 am

I hope someone can help me with this.

I can't get Wrye Mash to run. It worked perfectly until yesterday, when suddenly I can't launch it anymore. I haven't installed anything recently, except reinstalling wrye mash to no avail.

» Fri May 27, 2011 2:27 pm

On another topic, I'm confused about Bain. The readme describes most of the "wrong" colors but gives little or no info on how to correct the problems. It sounds like I would have to re-assemble the downloaded archives myself as there seems to be no way to tell Bain "the Data Files folder is *here* and the Readme is *here*" (and so forth). Also, it did no Doc File Sweeping or renaming whatsoever, and there seems to be no way to tell it: "OK, I renamed the txt file for you and this is the new name."

» Fri May 27, 2011 10:00 am

I hope someone can help me with this.

I can't get Wrye Mash to run. It worked perfectly until yesterday, when suddenly I can't launch it anymore. I haven't installed anything recently, except reinstalling wrye mash to no avail.

That's really very little to go on, unfortunately. Have you looked at Morrowind/Mopy/Wrye Mash.html?

If Mash Won't Start
? If Mash refuses to start, or quits after quickly flashing up a window...
? Check your Mash Shortcut

? Most users who have problems with Mash simply need to tweak the Start In and/or Target fields of the shortcut. (See Non-Standard Morrowind/Python Directories for more info.)
? If that's fine, then there may be a bug with Mash, or a problem with your setup. You can usually figure out the problem by creating a bug dump and reviewing it. And if you can't puzzle it out, someone on the Elder Scrolls forums may be able to help.

? Getting the Bugdump
? Open a command shell (Start: Programs: Accessories: Command Prompt).
? chdir to the Mopy directory. "chdir" means "change directory". E.g.: chdir C:\Program Files\Bethesda Softworks\Morrowind\Mopy
? Type: c:\python24\python.exe mash.py 0

? If you have a different version/location of python, adapt the first argument accordingly.
? That's the number zero at the end, not the letter 'o'.

? Doing this will cause any error messages that Mash generates on start to spew to the command shell. This is the bugdump.
? Dealing with the Bugdump
? First, look at it! ? especially the last several lines ? this will often give you a good clue as to what the problem is, and you may be able to resolve it on your own.
? Common Problems

? Can't find mash.py: Make sure that you chdir to the Mopy directory first.

? If that doesn't help, then go to the forums and post the whole bugdump. Preferably, you should post the dump in the Relz/Help topic (see Discussion link at top of page) or you can start a new topic. Be sure to mention "Wrye Mash" in the text of the post.
? Hint: Control-C does not work in the command line window, but you can still copy text from it by selecting the text, and then hitting the Enter key.

See if you can at least get the bugdump. That'll give us something to go on.

» Fri May 27, 2011 5:56 pm

That's really very little to go on, unfortunately. Have you looked at Morrowind/Mopy/Wrye Mash.html?See if you can at least get the bugdump. That'll give us something to go on.

Thanks, I hadn't seen that. This is the bugdump:

Traceback (most recent call last):  File "d:\morrowind\mopy\mash.py", line 7, in <module>	import masher  File "D:\Morrowind\Mopy\masher.py", line 460, in <module>	'off.green':  Image(r'images/checkbox_green_off.png',wx.BITMAP_TYPE_PNG),  File "D:\Morrowind\Mopy\balt.py", line 132, in __init__	raise ArgumentError(_("Missing resource file: %s.") % (self.file,))bolt.ArgumentError: Missing resource file: bolt.Path('images\\checkbox_green_off.png').

I've looked and the image file checkbox_green_off.png is not missing.

» Fri May 27, 2011 12:37 pm

Weird.

Is there an Images folder in Mopy? With that checkbox graphic in? If not, back up anything from the Mopy directory you need and then delete. Re-extract from the Wrye Mash archive double-checking that "Use folder paths" is enabled.

Alternatively, maybe the Mopy\Settings.pkl file has gotten corrupted. Try renaming it to settings.old and re-running Mash.

» Sat May 28, 2011 12:43 am

It was indeed the settings file that has become corrupted somehow. Thanks for the help.

» Fri May 27, 2011 5:11 pm

What's up with Wrye's web page, it won't load? :-/

I'm going to use Google's cache, but it's a bit tedious having to google everything in order to get there since the links don't work...

» Sat May 28, 2011 1:12 am

What's up with Wrye's web page, it won't load? :-/

I'm going to use Google's cache, but it's a bit tedious having to google everything in order to get there since the links don't work...

Read back a page Veeno - post #159.

» Sat May 28, 2011 12:48 am

*sigh*

I'm in the boat of having had Mash working just fine - to suddenly stop working all of a sudden and I have no idea why. Here's my bug dump any help would be greatly appreciated:

C:\Program Files\Bethesda Softworks\Morrowind\Mopy> C:\Python25\python.exe mash.
py 0
Traceback (most recent call last):
File "mash.py", line 15, in
masher.InitSettings()
File "C:\Program Files\Bethesda Softworks\Morrowind\Mopy\masher.py", line 6517
, in InitSettings
mosh.initSettings()
File "C:\Program Files\Bethesda Softworks\Morrowind\Mopy\mosh.py", line 6638,
in initSettings
settings = Settings(path)
File "C:\Program Files\Bethesda Softworks\Morrowind\Mopy\mosh.py", line 222, i
n __init__
inData = http://forums.bethsoft.com/index.php?/topic/718247-relz-wrye-mash-4/cPickle.load(open(self.path))
EOFError